Triple Pair Mills
Ideal for a Target Particle Sizes of 500 Micron or less
- Triple pair machines have the versatility to run various product sizes, ranging from 300-1200 micron.
- Triple pair mills are used for special applications, which usually require a finer finished product or in the event when an extensive range of materials will need to be processed through the same machine.
- Used when higher grinding capacities are needed.
- Triple pair mills can be employed to allow one machine to serve not only as a two pair high grinder, but also a single pair cracking,crimping mill.
- With a Triple pair machine you have the ability to power down the motors not being used.
| Mill Size | Estimated Capacity @ 500 Micron for # 2 yellow corn |
Required Motors |
| 9x12 | 3.2 Ton | (3) 10 HP |
| 9x18 | 6 Ton | (3) 15 HP |
| 9x24 | 8 Ton | (3) 20 HP |
| 9x30 | 10 Ton | (3) 25 HP |
| 9x36 | 12 Ton | (3) 30 HP |
| 9x42 | 14 Ton | (3) 40 HP |
| 12x24 | 16 Ton | (3) 30 HP |
| 12x30 | 20 Ton | (3) 40 HP |
| 12x36 | 24 Ton | (2) 50HP & (2) 25HP |
| 12x42 | 28 Ton | (2) 60HP & (2) 30HP |
| 12x52 | 36 Ton | (2) 75HP & (2) 40Hp |
| 12x72 | 48 Ton | (2) 100 HP & (2) 50HP |
| 16x72 | 60 + Ton | TBA |
| Capacity and HP will vary depending on product type | ||
RMS has the ability to provide you with 3D and 2D layout designs