Mill Reconditioning

                             Rebuild or Recondition your Existing Roller Mill

RMS Roller MillWe offer the following rebuild services: 

  • On site conversion of your roller mill to a roller-grinder
  • Complete factory rebuild and conversion of your roller mill to a roller-grinder

       

Upgrade to a Dual Motor Drive

If your roller mill is not quite keeping up, upgrade your present mill and save up to 75% of the cost of a new mill. With our patented dual motor drive system, ( pictured below), we can guarantee a capacity increase of at least 20%. While saving you money.

The Roll Grinding Drive

The photo to the right shows one side of a Patented RMS dual motor drive system that uses only "Super HC VX" belts. This superior drive system solves many of the all too common problemsRoller Mill associated with conventional double sided belt drives:

  • Eliminates all belt slippage:     Conventional double sided belt drives slip, stretch, generate excessive heat, and have a lower service factor;than RMS VX drives. Therefore, maintenance issues and cost are much more frequent.
  • Eliminating all idlers:    RMS drives do not have any idler pulleys. Our three point drive does not need any idlers or tentioners. This eliminates moving components and makes the drive system simpler.
  • Allows for shorter roll shafts:     Double sided belts are not rated for as much horse power as a VX belt; thus more belts and longer shafts are required. With our patented drive we have decreased the number of belts at least by half.

Simplicity of Design...means reliability of operation!

drive.JPG (108941 bytes)This photo shows another view of a Patented RMS DUAL Motor  Drive System. This RMS 12 x 52" mill is driven by two 75 horsepower motors. As you can see, the machine is designed smarter to offer superior performance, while allowing ease of maintenance.

  • Our first priority was making roll changes as easy and convenient as possible, reducing cost and minimizing downtime.
  • Cost studies have shown a 35% decreasein service costs over our competitors

Benefits of a Dual Motor Drive include: Roller Mill

  • Reduced V-belt problems
  • Zero idler bearing problems 
  • Zero tensioner problems
  • Decrease in energy lost through heat generated by friction
  • Less moving parts to fail; we have created a much simpler and efficient drive system.

 

 Interested in a reconditioned mill?

Contact us today at 605.368.9007 to learn more about the rebuilt mills we currently have available!